HomeAreas We CoverFleet
Embassy Gas • Surrey & Hampshire

Fleet Boiler, Heating & Plumbing Engineers (GU51–GU52)

Need an annual boiler service, rapid boiler repairs, a correctly matched new boiler installation, monthly boiler breakdown cover or a trusted plumber in Fleet? This hub is built to route you to the right page fast — simple, direct, and no hunting around. For general plumbing (taps, toilets, leaks, radiator valves, low pressure issues), use our Fleet plumber page.

We work across Fleet and nearby areas including Church Crookham, Elvetham Heath, Ancells Farm, Edenbrook, Velmead, Crookham Village, Netley Marsh and out towards Hartley Wintney. Landmarks we’re regularly around include Fleet Pond, Hart Shopping Centre, The Harlington, Fleet Station and the Basingstoke Canal towpath.

GU51–GU52 has lots of 1980s–2000s estates, newer apartments near transport links, and pockets of older homes around the village edges. Locally we’re often called out for pressure drops, hot water turning lukewarm, radiators cold in patches, recurring fault codes, noisy boilers (kettling), and condensate issues during sub-zero mornings. Water here is typically hard, so scale control and clean system water are key for long-term reliability.

In-house Gas Safe engineers Fleet (GU51–GU52) Estates + apartments + village edges Boilers + plumbing + cover

Fleet services

Choose the route that matches what’s happening today. Each page is built to make the next step obvious — book quickly, understand likely causes, then move forward.

Boiler Service

Boiler Service in Fleet

Keep your boiler safe, efficient and less likely to fail — especially useful in hard water areas where scale can quietly reduce performance.

  • Best when the boiler is running and you want a proper health check
  • Helps reduce kettling/noise and efficiency loss
  • Ideal before winter and for landlords / home sales
Boiler Repair

Boiler Repairs in Fleet

For breakdowns, leaks, pressure loss, fault codes, or “hot water goes cold mid-use” — this is the fastest path to diagnosis and booking.

  • Right choice for no heating / no hot water
  • Common locally: diverter faults, circulation issues, PRV discharge, sensor problems
  • Get it stable first — consider cover afterwards
Installation

Boiler Installation in Fleet

Replacing an older boiler? This route covers what’s included, how we size the boiler properly, and how to arrange a quote or survey.

  • Best for ageing boilers or repeat breakdowns
  • Proper commissioning, controls, and warranty setup
  • Advice on filtration and scale protection for GU51/GU52 water
Breakdown Cover

Boiler Breakdown Cover in Fleet

Want calmer monthly budgeting? Choose a tier that fits your home — boiler-only through to wider protection for heating and plumbing.

  • Helps smooth out unexpected repair costs
  • Choose boiler-only vs heating system vs broader home cover
  • Most suitable once the boiler is running properly
Plumbing

Plumbers in Fleet

For plumbing issues like dripping taps, toilet faults, leaking pipework, radiator valve leaks, and low pressure investigations.

  • Best for plumbing faults (not a boiler failure)
  • Leak tracing, valve issues, pressure checks
  • Quick booking route for common household jobs
Helpful tip: If the boiler is off today, book a repair first. Once it’s running reliably, cover becomes a far cleaner decision.

Fleet coverage

We serve Fleet across GU51–GU52 and nearby areas including Church Crookham, Elvetham Heath, Ancells Farm, Edenbrook, Velmead and surrounding streets. For general household plumbing in these areas, use /fleet/plumber.

  • Landmarks: Fleet Pond, Hart Shopping Centre, Basingstoke Canal
  • Routes we see daily: M3 / A323 / A3013 links
  • Postcodes: GU51, GU52

Water profile & common faults

Around GU51–GU52 the water is typically hard, which can gradually reduce hot water performance on some combi boilers as limescale builds up. We also see system-water quality issues (sludge/magnetite) that affect radiator output and can shorten component life if left untreated.

  • Scale-related symptoms: kettling/rumbling, fluctuating hot water, restricted flow, overheating lockouts
  • Heating symptoms: cold spots on radiators, noisy pump/pipework, uneven heat, sticking valves
  • Seasonal issues: condensate freezing, pressure drops, PRV discharge leaks

Fleet boiler FAQs

I’m in Fleet — what’s the quickest route to the right help?
If your boiler is running and you want a preventative check, start with Boiler Service. If you’ve lost heating/hot water, have leaks or fault codes, start with Boiler Repair. Replacing an older unit? Use Boiler Installation. If you want predictable monthly protection after everything is stable, use Breakdown Cover. For non-boiler plumbing issues, use Fleet plumber.
Do you cover GU51 and GU52 (including Church Crookham and Elvetham Heath)?
Yes — this hub is built for Fleet GU51–GU52 and nearby areas like Church Crookham, Elvetham Heath, Ancells Farm and Edenbrook. The booking route confirms coverage for your exact address.
Why does hot water temperature fluctuate in hard water areas like Fleet?
Limescale can restrict the plate heat exchanger and sensors can struggle to maintain stable temperature at low flow. Servicing and correct protection can help, but diagnosis matters.
My radiators have cold patches — is that air or sludge?
If the top is hot and the bottom stays cool, it’s often sludge/magnetite. If the radiator is cold at the top, it can be trapped air. We can check circulation, balancing and filtration on a visit.
What causes kettling/rumbling noises in Fleet boilers?
The most common causes are scale restriction, poor circulation, or system-water issues. Because different faults can sound similar, a proper diagnosis is the quickest way to prevent repeat breakdowns.
Should I sort a repair before I take breakdown cover?
Usually yes — get the boiler stable first, then choose the cover tier once it’s working reliably. It keeps the plan choice simpler and avoids unnecessary back-and-forth.
Do you handle plumbing jobs in Fleet too?
Yes — for taps, toilets, leaks, radiator valves and low pressure checks use /fleet/plumber.

Next step for Fleet

Choose the most relevant page below — or hit “Book” and we’ll route you based on your boiler type and what’s happening today.

Embassy Gas

You’re connected to Ember
– your AI assistant for today

🟢 Ember is online

Ember is typing…